BLISTER PACKING

ALU ALU BLISTER PACKING MACHINE

The machine accommodates forming material reels of up to 600mm in diameter and a waste material trimming cutter, which allow production runs of approximately 90 minutes therefore reducing the material replacement frequency.

  • Equipped with integrated forming material splicer to enhance efficiency.
  • Automatic format positioning system achieves straightforward format changeover.
  • Window frame type no-waste-trimming cutter saves packaging materials.
  • Adopts transverse cutter which easily collects its blister card and rejects faulty blister.
  • The working area is in cantilever construction.


Contact us for further details


BLISTER PACKING MACHINE PVC-ALU

The machine accommodates forming material reels of up to 600mm in diameter and a waste material trimming cutter, which allow production runs of approximately 90 minutes therefore reducing the material replacement frequency.

  • Equipped with integrated forming material splicer to enhance efficiency.
  • Automatic format positioning system achieves straightforward format changeover.
  • Window frame type no-waste-trimming cutter saves packaging materials.
  • Adopts transverse cutter which easily collects its blister card and rejects faulty blister.


Contact us for further details


HIGH SPEED BLISTER FORMING FILLING & SEALING

  • The machine can achieve 180 minutes of uninterrupted production thanks to a forming material reel of up to 600mm in diameter and a waste material trimming cutter (optional).
  • Equipped with integrated forming material splicer and automatic format positioning system to achieve straightforward format changeovers.
  • In the sealing station, when the machine stops, the heating sealing mould can rise up automatically, to prevent hot air from getting into the blister pockets, so that medicine effectiveness is preserved.
  • Sealing pressure adopts the gas-hydraulic pressure cylinder, so the pressure can be set freely according to the sealing area (commonly a larger sealing area requires higher pressure).
  • Add a perforation station, to separate the perforation from the embossing station. Conventionally, perforation and embossing remain in one station, but this will influence the clarity of each.
  • This machine can be custom-built to produce plastic thermoformed trays with maximum forming depth reaching 50mm.


Contact us for further details


LABORATORY TYPE BLISTER PACKING MACHINES

Produces small batches of all types of blister packs including thermoformed and cold-formed.
Easy use interface. Compact space saving, table top design for convenient blister packaging.
Fast set-up and minimal training required. Tool-less changeover of format parts in less than 5 minutes.
Blister pack using a variety of materials, novel shapes, sizes or perforations.
Fast & easy set-up no specialist knowledge is required to operate so there is no need for an engineer to be present Compact, portable design.


Contact us for further details


BLISTER TUBE FEEDER

This Blister Tube Feed System improves the performance and increases the productivity of your blister packaging production. It is suitable both for intermittent or continuous motion blister packaging machine


Contact us for further details


SHOOT ALU- ALU BLISTER FEEDER

he Chute alu-alu blister feeder consists of a hopper, vibratory conveyor, three grooved plates for tablet flow and a rotary brush made of rubber blades to mix the tablets or capsules. It can feed flat tablets, capsules into the aluminum blisters via tracks or tubes.


Contact us for further details


CAPSULE ORIENTATION AND FEEDING DEVICE


Contact us for further details


VIAL AND AMPULE FEEDER

Servo and pneumatically driven robot arm with vacuum suction cups.
A conveyor transports the vials or ampoules into the tracks.
. A motor driven slide distributes the vials or ampoules evenly.
. A rake guides the vials or ampoules into the chutes and forms them into lines; from there they continue into the slots of a roller.
. The servo driven roller turns 90 degrees, moving the vials and ampoules into a horizontal position.
. The ampoules and vials are then collected by the vacuum arm, with vacuum suction cups from the slots of the roller, and accurately and gently placed into the formed web.


Contact us for further details


DE BLISTERING MACHINE

Press-Out Automatic DE blistering Machine is an auxiliary equipment of Blister Machine, it can empties tablets and capsules from reject blister packs at a rate of up to 120 blisters per minute. The mechanism is adjustable, for different blister formats, change parts are not required.


Contact us for further details


THERMOFORMERS FOR FOOD PACKAGING

This Thermoformer is widely used in foodstuff industry and dairy products. It is suitable for packaging of honey, cheese, jam, chocolates, butter, etc.
Equipped with paste feeder (also suitable for liquid), it can preserve temperature that ensure the chocolate, jam, butter are discharged into blister pockets smoothly, freely and accurately.


Contact us for further details


PLASTIC CARDBOARD BLISTER MACHINE

Plastic-cardboard Blister Machine has a large forming area suitable for paper/pvc or alu/pvc blister packaging of batteries, electronic products, electric toys, cosmetics etc.


Contact us for further details